Products: Moisture Remediation

S-1300 PENE-KRETE®

A revolutionary product, Super-Krete S-1300 Pene-Krete is a non-hazardous penetrating densifier for use on all concrete and masonry substrates. Pene-Krete reacts with alkali and free lime in common cement and creates an internal crystal-like shield, increasing the strength of new and existing concrete and masonry, and reducing moisture vapor transmission

Read More »

S-1400 PENE-KRETE® ADDITIVE

A non-hazardous liquid additive formulated to create a chemical reaction within portland cement-based products. The addition of Pene-Krete Additive enhances the concrete's natural hydration process by prolonging the hydration of the cementing materials and increasing workability

Read More »

VAPORSOLVE® 100

VaporSolve® 100 is a low viscosity, hydrophobic resin system that cures on wet or damp concrete. It is used as a single coat remediation system or a top coat over VaporSolve® Primer.

Read More »

VaporSolve® 100 LP

VaporSolve 100 LP is a specially formulated 100% solids epoxy coating designed to comply with ASTM F-3010 and is for use over concrete with high moisture levels for the purpose of isolating the concrete from moisture sensitive flooring. When used without a primer in a single coat application, it is referred to as the VaporSolve Basic System.

Read More »

VAPORSOLVE® FRESH CONCRETE

VaporSolve® FC (Fresh Concrete) is a specially formulated water-based epoxy for use over freshly poured concrete to act as a high-performance concrete curing compound and as a primer under VaporSolve® 100 material. VaporSolve FC has been formulated with very low viscosity and surface tension to ensure excellent substrate wetting, penetration and adhesion

Read More »

VAPORSOLVE® JOINT FILLER

VaporSolve® Joint Filler is a non-shrinking, semi-rigid epoxy paste used for filling joints and cracks in concrete that will receive VaporSolve® Systems. It resists long term moisture and alkalinity.

Read More »

VAPORSOLVE® PRIMER

VaporSolve® Primer is a water-based epoxy material with deep penetration and adhesion to concrete. It has superior performance to 100% solids materials over contaminated concrete. This product eliminates or greatly reduces concrete outgassing.

Read More »

VAPORSOLVE® TIE COAT

VaporSolve® Tie Coat is a two component, fast drying water-based epoxy formulated for use over non-porous surfaces such as APF's VaporSolve® Moisture Remediation Systems. It insures the adhesion of subsequently applied cementitious overlays. VaporSolve® Tie Coat adheres tenaciously to hard glossy surfaces and provides an excellent bonding surface for the overlay.

Read More »