SK-E200
SK-E200 is a two component water-based epoxy with excellent adhesion and rapid cure times. Its unique chemistry provides short re-coat times and good low temperature curing. This material has little odor, applies easily and adheres to damp concrete. SK-E200 was designed for use as a fast curing primer under epoxy, acrylic, polyurethane and polyurea materials. It may also be used as a base coat in fast turnaround color chip systems. Re-coat times range from 30 minutes to 90 minutes depending on film thickness, curing conditions and the type of top coat used. SK-E200 is ideally suited as a primer over properly neutralized interior acid stains where odor cannot be tolerated. SK-E200 primer with SK-P100 or SK-P501 top coats may be accomplished in one trip to the job site. Fewer trips to the job site result in reduction of labor costs.
Colors & Finishes
- Bone
- Flaxen
- Wheat
- Sand
- Buff
- Thatch Brown
- Adobe
- Red Brick
- Seattle Red
- Concrete Gray
- Delta Fog
- Sterling
- Slate
- Safety Yellow
- Safety Red
- Safety Blue
- Clear
Packaging
- 1.5 Gallons
- 15 Gallons
