1/8" Stamp Overlay System
The 1/8" Stamp Overlay System is a stampable overlay system using S-9300 Bond-Kote®. It is textured at a thin 1/8” profile directly over properly prepared concrete. The design possibilities are endless, with more than 200 stamp and texturing mats, and a wide variety of colors to choose from or create.
1/8" Stampable Overlay System Application Instructions
1/8" Stampable Overlay System Datasheet
1/8" Stampable Overlay System Specification
PRODUCTS
CleanerS-12000 HEAVY DUTY DEGREASER™ Learn More »
Super-Krete S-12000 Heavy Duty Degreaser is a fortified multipurpose cleaner formulated to remove deeply penetrated oil, grime, other contaminants and surface residue from concrete. For interior and exterior use, Heavy Duty Degreaser is an alternative to muriatic and other acids...
TreatmentS-1300 PENE-KRETE® Learn More »
A revolutionary product, Super-Krete S-1300 Pene-Krete is a non-hazardous penetrating densifier for use on all concrete and masonry substrates. Pene-Krete reacts with alkali and free lime in common cement and creates an internal crystal-like shield, increasing the strength of new and existing concrete and masonry, and reducing moisture vapor transmission
1/8th" OverlayS-9300 BOND-KOTE® GRAY (Option 1)Learn More »
S-9300 Bond-Kote Gray and S-9302 Bond-Kote White are the ultimate concrete repair, resurfacing and texturing product all-in-one! Bond-Kote virtually eliminates the need to remove and replace old, damaged concrete. It is a ready-mix formula. Just add water! Use Bond-Kote for crack treatments, curb and gutter repair, sidewalk resurfacing, driveway resurfacing and anywhere else there is concrete!
1/8th" OverlayS-9302 BOND-KOTE® WHITE Learn More »
S-9300 Bond-Kote Gray and S-9302 Bond-Kote White are the ultimate concrete repair, resurfacing and texturing product all-in-one! Bond-Kote virtually eliminates the need to remove and replace old, damaged concrete. It is a ready-mix formula. Just add water! Use Bond-Kote for crack treatments, curb and gutter repair, sidewalk resurfacing, driveway resurfacing and anywhere else there is concrete!
Release AgentS-1710 LIQUID RELEASE AGENT™ Learn More »
S-1710 Liquid Release Agent is designed to make applying textures to concrete easy and error-free while extending stamping tool life. S-1710 Liquid Release Agent acts as a lubricant and conditioner to keep tools clean.
Clean-UpS-200 SUPER-SCRUB™ Learn More »
Super-Scrub is a non-lotion cleaner used primarily for the removal of Super-Krete S-1710 Liquid Release Agent™ residue from stamped concrete and stampable overlays. Super-Scrub ensures the removal of release agents without creating a film or bond-breaker
Base ColorS-9500 COLOR STAIN™ Learn More »
Super-Krete S-9500 Color Stain achieves a decorative acid stain look without the hazard or special handling. Color Stain is a water-based, penetrating, non-acidic, acrylic/urethane emulsion that creates a natural look on new and existing surfaces. Color Stain is durable and protective
Accent ColorS-9500 COLOR STAIN™ Learn More »
Super-Krete S-9500 Color Stain achieves a decorative acid stain look without the hazard or special handling. Color Stain is a water-based, penetrating, non-acidic, acrylic/urethane emulsion that creates a natural look on new and existing surfaces. Color Stain is durable and protective
Top CoatS-8350 SUPRA-SEAL™ VOC (Option 1)Learn More »
S-8350 Supra-Seal™ VOC is a clear, solvent-based acrylic designed for sealing conventional concrete, exposed aggregate, porous tile, concrete pavers and a variety of architectural concrete surfaces. S-8350 Supra-Seal is based on a hard acrylic polymer that produces coatings that provide good gloss, stain-resistance and cleanability
Top CoatS-8400 SUPRA-SEAL™ PLUS Learn More »
S-8400 Supra-Seal Plus is a clear, solvent-based acrylic designed for sealing conventional concrete, exposed aggregate, porous tile, concrete pavers and a variety of architectural concrete surfaces. S-8400 Supra-Seal Plus is based on a hard acrylic polymer that produces coatings that provides good gloss, stain-resistance and cleanability
ToolsS-19000 GAUGE RAKE™ W/ CAMS Learn More »
This Gauge Rake is designed to rake out Super-Krete Overlay Materials at 1/4″ (Super-Stamp, Stamp-Kote) or 1/8″ (Bond-Kote) evenly across the surface to be stamped to ensure the proper depth of material is applied. Gauge Rake must be set with the appropriate CAMS for achieving the desired thickness
ToolsS-16000 FLEX SMOOTHER™ Learn More »
Super-Krete Flex Smoother is designed to be used with Super-Krete’s 1/4″ stamp overlay products (Super-Stamp & Stamp-Kote) while standing to smooth the gauge rake lines formed by Super-Krete gauge rake when evenly spreading the stampable material over the surface at 1/4″, the surface is smoothed out, and becomes ready to be stamped
S-12000 Heavy Duty Degreaser Kit Part A SDS 2016
S-12000 Heavy Duty Degreaser Kit Part B SDS 2016
S-12000 Heavy Duty Degreaser SDS 2016
S-12000 Heavy Duty Degreaser™ Product Datasheet
S-1300 Pene-Krete SDS 2016
S-1300 Pene-Krete® Product Datasheet
S-1710 Liquid Release Agent™ Product Datasheet
S-1710 Liquid Release SDS
S-200 Super Scrub SDS
S-200-Super-Scrub™ Product Datasheet
S-8350 Supra-Seal™ SDS
S-8350 Supra-Seal™ VOC Product Datasheet
S-8400 Supra-Seal™ Plus Product Datasheet
S-8400 Supra-Seal™ Plus SDS
S-9300 Bond-Kote Gray SDS 2016
S-9300 Bond-Kote® Product Datasheet
S-9302 Bond-Kote White SDS 2016
S-9500 Color Stain™ Color Chart
S-9500 Color Stain™ Pigment Pack_SDS
S-9500 Color Stain™ Product Datasheet
