Acid Stain 100 System
Acid Stain 100 is an acidic coloring system that chemically reacts with concrete and other cementitious substrates to create translucent and variegated color effects. It’s sealed with a two-component, high-performance polyester urethane, giving it unmatched chemical and abrasion resistance. The coloration becomes a permanent part of the substrate and cannot crack or peel. Acid Stain 100 gives a unique look that cannot be achieved with conventional polymer and pigment-type stains. The material reacts individually with each substrate depending on its available cement content, age and porosity. Considerable variations in color and tone normally result from the use of Acid Stain 100, and many special color effects can be achieved using different methods of application. Acid Stain 100 is low VOC. It’s ideal for all forms of interior and exterior conventional and architectural concrete.
Acid Stain 100 System Datasheet
Acid Stain 100 System Specification
PRODUCTS
PrimerSK-P250 (Option 1)Learn More »
SK-P250 is a two component, low viscosity acrylic urethane. It is used as a primer/sealer over a variety of surfaces. The useof special solvents and adhesion promoters gives this material excellent penetration and adhesion to minimally profiled concrete
PrimerSK-P250 VOC (Option 2)Learn More »
SK-P250 VOC is a two component, low viscosity acrylic urethane. It is used as a primer/sealer over a variety of surfaces. The use of special solvents and adhesion promoters gives this material excellent penetration and adhesion to minimally profiled concrete
StainS-4000 ACID STAIN Learn More »
S-4000 Acid Stain is an acidic coloring solution which chemically reacts with concrete and other cementitious substrates to create translucent and variegated color effects. The coloration becomes a permanent part of the substrate and cannot crack or peel
Top CoatSK-P100 (Option 1)Learn More »
SK-P100 is a two component, high solids aliphatic polyurethane. This product offers a remarkable combination of performance properties not found in other polymer coatings. SK-P100 produces protective films which are hard, flexible and very impact resistant
Top CoatSK-P100 VOC (Option 2)Learn More »
SK-P100 VOC is a two component, high solids aliphatic polyurethane formulated to comply with California V.O.C. regulations. This product offers a remarkable combination of performance properties not found in other polymer coatings. SK-P100 VOC produces protective films which are hard, flexible and very impact resistant
S-4000 Acid Stain Color Chart
SK-P100 PART A
SK-P100 PART A PIG
SK-P100 PART B
SK-P100 PART B PIG
SK-P100 Product Datasheet
SK-P100 VOC A PIG
SK-P100 VOC PART A
SK-P100 VOC PART B
SK-P100 VOC Product Datasheet
SK-P250 PART A
SK-P250 PART B
SK-P250 Product Datasheet
SK-P250 VOC PART A
SK-P250 VOC PART B
SK-P250 VOC Product Datasheet