VaporSolve® Ultra System
The VaporSolve® Ultra System consists of a water-based epoxy as a primer that gives deeper penetration and better adhesion when applied to silicate-contaminated concrete, as well as a finish coat of VaporSolve 100, which greatly reduces the possibility of concrete outgassing. System thickness is 12 mils. It must be used if reactive silicates have been previously applied to the concrete, or if the history of the concrete cannot be positively determined.
VaporSolve® Ultra Application Instructions
VaporSolve® Ultra System Datasheet
VaporSolve® Ultra System Specification
PRODUCTS
Primer CoatVAPORSOLVE® PRIMER Learn More »
VaporSolve® Primer is a water-based epoxy material with deep penetration and adhesion to concrete. It has superior performance to 100% solids materials over contaminated concrete. This product eliminates or greatly reduces concrete outgassing.
Top CoatVAPORSOLVE® 100 Learn More »
VaporSolve® 100 is a low viscosity, hydrophobic resin system that cures on wet or damp concrete. It is used as a single coat remediation system or a top coat over VaporSolve® Primer.
Patching MaterialVAPORSOLVE® JOINT FILLER Learn More »
VaporSolve® Joint Filler is a non-shrinking, semi-rigid epoxy paste used for filling joints and cracks in concrete that will receive VaporSolve® Systems. It resists long term moisture and alkalinity.
SK-VaporSolve® 100 Product Datasheet
SK-VaporSolve® Joint Filler Product Datasheet
SK-VaporSolve® Primer Product Datasheet
VAPORSOLVE® 100 PART A
VAPORSOLVE® 100 PART A PIG
VAPORSOLVE® 100 PART B
VAPORSOLVE® 100 PART B FC
VAPORSOLVE® JOINT FILLER FAST CURE PART B
VAPORSOLVE® JOINT FILLER PART A
VAPORSOLVE® JOINT FILLER PART B
VAPORSOLVE® PRIMER PART A
VAPORSOLVE® PRIMER PART B
